Special offer - Delivery now £4.99 when ordered onlineDiamond-tipped and tungsten carbide-tipped precision scribers
These high quality Micro to Nano scribing tools are useful for marking, engraving and scribing samples, tools and specimen substrates. They are available with either a sharp tungsten carbide tip or with diamond tips in various tip angles and styles.
The natural diamond tip base sizes are approximately 0.8mm in diameter and vacuum brazed on a tool steel shaft. Scribers can be used to make fine lines on a wide variety of materials ranging from glass, ceramics, silicon, metals and plastics. They are also ideal for scribing silicon wafers prior to cleaving.
Scribing tool specifications:
|
Product # |
Style |
Tip |
Tip angle |
Type |
Length |
|
52-001099 |
Value-Tec CS1 |
Tungsten carbide |
45 degrees |
Knurled handle |
150mm |
|
52-002012 |
Micro-Tec DS2 |
Diamond |
60 degrees |
Knurled handle |
150mm |
|
52-002014 |
Micro-Tec DS4 |
Diamond |
90 degrees |
Knurled handle |
150mm |
|
52-002016 |
Micro-Tec DS5 |
Diamond |
120 degrees |
Retractable pen |
140mm |
Ordering information
|
Qty
|
|
 The Micro to Nano Value-Tec CS1 carbide tipped scriber is designed for scribing and marking samples, sample mounts, embeddings and parts. It can also be used for scribing and/or marking for wafer cleaving. The sharp 45° tungsten carbide tip is mounted on a 3.175mm (1/8") shaft. The tungsten carbide tip can scribe in steel, brass, aluminium, copper, plastics, etc. The Value-Tec CS1 carbide tipped scriber can be used to scribe glass, but will wear quicker than diamond scribers. It is a pen-type scriber with a body diameter of 7.5mm and a total length of 150mm. |
|
Qty
|
|
 Replacement tungsten carbide tip for the Value-Tec CS1 carbide tip scriber. Sharp 45° tungsten carbide tip on a 3.2mm (1/8 inch) shaft with a length of 32mm |
|
Qty
|
|
 The Micro-Tec DS2 diamond tipped scriber is intended for scribing glass, ceramics, silicon, metals etc. It is particularly useful for scribing silicon wafers prior to cleaving. It has a sharp 60° diamond tip on a 3mm shaft for fine engraving and markings. It is longer lasting then tungsten carbide tips when properly used. A pen-type scriber with a body diameter of 7.5mm and a total length of 150mm and has a sleek knurled, coated steel body for excellent grip. There is a removable clip. |
|
Qty
|
|
 The Micro-Tec DS2 diamond tipped scriber is intended for scribing glass, ceramics, silicon, metals etc. It is particularly useful for scribing silicon wafers prior to cleaving. It has a sharp 90° diamond tip on a 3mm shaft for fine engraving and markings. It is longer lasting then tungsten carbide tips when properly used. A pen-type scriber with a body diameter of 7.5mm and a total length of 150mm and has a sleek knurled, coated steel body for excellent grip. There is a removable clip. |
|
Qty
|
|
 90 degree replacement diamond tip for Value-Tec DS4 diamond tipped scriber |
|
Qty
|
|
 The Micro-Tec DS2 diamond tipped scriber is intended for scribing glass, ceramics, silicon, metals etc. It is particularly useful for scribing silicon wafers prior to cleaving. It has a sharp 120° diamond tip on a 3mm shaft for fine engraving and markings. It is longer lasting then tungsten carbide tips when properly used. A pen-type scriber with a body diameter of 7.5mm and a total length of 150mm and has a sleek knurled, coated steel body for excellent grip. There is a removable clip |