Green PET polyester Mylar tapes

Micro to Nano single-sided green PET tape consists of a polyester (Mylar) film with a silicone adhesive. Especially suited for:

Masking for vacuum deposition
Masking for powder coating and anodising
Holding specimens or parts in high vacuum
Positioning tape
General laboratory use
As a transfer tape or for temporary applications
Temporary sealing tape

Also known as anodising or powder coating masking tape, green PET laboratory tape is an economical alternative for Kapton tape in less demanding applications and when temperatures are lower than 200°C. It has low outgassing under vacuum. The tape is self-wound without a liner and is available in widths from 6mm to 50mm with a length of 20m. Mounted on a clean 76mm diameter plastic core.

PET tape has low adhesive transfer and if used as temporary tape or transfer tape, only minimal pressure is needed. With a thicker film and lower adhesion properties this silicone-based adhesive tape is easy to remove and leaves clean surfaces.

Mylar tape specifications
Tape material	PET: polyester (Mylar)
Colour	Green tinted
Adhesive	Silicone adhesive
Film thickness	0.05mm
Adhesive thickness	0.04mm
Total tape thickness	0.09mm
Adhesive strength	10N/25mm
Tape strength	135kPa
Dielectric strength	4.5kV
Use temperature range	-20 to +204°C
Length	20m
Core diameter	76mm (3”)